
On Slough Trading Estate, the cleaning challenge is access, not floor area: around 350 businesses means each unit needs its own agreed schedule and controls. A data hall, a late-shift industrial unit and an office suite can sit close together, yet their safe cleaning windows and permissions are different.
If you’re considering commercial cleaning in Slough, the practical first step is to agree how cleaning will work inside your unit, not assume that one estate-wide timetable will suit every occupier.
What the estate actually is
Slough Trading Estate is the largest business park in Europe under single ownership. It is owned and managed by SEGRO, is home to around 350 businesses and hosts the largest cluster of data centres in Europe. It operates under a Simplified Planning Zone and has its own private power network. It began in 1918 as a government motor repair depot for the First World War, and was sold to private investors in 1920.
Three kinds of unit, three different risks
Data halls and critical areas need strict boundaries. No unauthorised access, touching equipment, photography or risk of interrupting power. A general cleaning specification must make clear which rooms and surfaces are excluded.
Light-industrial and logistics units have different demands. Late shifts, powered pallet trucks and active loading areas affect when floors can be cleaned and how slip risks are controlled. Waste volumes and floor condition also need to be considered. A suitable warehouse cleaning in Slough specification should define the permitted areas and methods. CQD’s warehouse and industrial cleaning service is scoped around the working environment, rather than a generic office checklist.
Office suites need a presentation-focused routine for washrooms, kitchens, meeting rooms and shared surfaces. For office cleaning Slough businesses should specify which rooms need attention before the working day begins. CQD also provides daily office and business park cleaning.
These unit types can be neighbours. Each needs a specification that reflects its actual use.

Access is a per-unit agreement, not an estate-wide one
Estate-wide access procedures affect the schedule, but permission to enter the estate does not automatically mean permission to enter a particular unit. Before the first clean, agree the arrival route, gate procedure, sign-in requirements and the named contact for that unit. Do not assume that a pass, gate code or entry process for one occupier applies to another.
For out-of-hours work, set out whether the cleaner must sign in, show identification, collect a visitor pass or wait for an escort. Confirm where sign-in takes place, who can authorise entry and how the cleaner contacts the site if the agreed person is unavailable. These arrangements should be clear before the cleaning window starts.
Keys, fobs and alarms need the same level of control. Record which key or fob opens which door, who is authorised to issue it and how it is returned. Agree the alarm procedure for arrival and departure, including what to do if the alarm does not respond as expected. Access codes should only be shared through the agreed secure process.
A change of occupier means the access plan must be checked again. The new occupier may have different alarm settings, restricted rooms, key holders, escort rules and out-of-hours contacts. Old keys, fobs and permissions should not be treated as valid simply because the building is unchanged. Re-agree the arrangements each time a unit changes hands: access rules change with the occupier, not the building.
The specification should also name the person who can authorise an extra task. If conditions on arrival differ from the plan, for example, an area is occupied, a door is unexpectedly secured or a floor is in active use. The cleaner should stop and call that named contact. They should not enter, move equipment or improvise a different task without authorisation. That simple rule protects people, equipment and the agreed scope.
Why the data centre cluster changes the risk conversation
The presence of a major data centre cluster makes clear boundaries essential. CQD’s scope is the surrounding general environment: offices, welfare areas, circulation spaces, meeting rooms and general floors. Server halls, white space and critical-environment areas are outside a general cleaning contract and require specialist arrangements.
A provider who says yes to every area without first confirming the boundaries is the one to question. A written scope should identify what is included and what is excluded, so there is no uncertainty on the day.
Working outside the operating day
Cleaning times are agreed with your site. Depending on your unit’s needs, the window may be early morning, evening, overnight or at the weekend. A shift operation needs a window planned around shift change, loading movements and access, not simply around standard office hours.
Out-of-hours work means more access control, not less. Confirm sign-in, escort and alarm procedures, along with the contact to call if access is delayed or conditions have changed. The right routine keeps cleaning predictable without disrupting work.

What goes into the written specification
A unit-level cleaning specification should set out:
- Areas and frequencies: each room or zone included and how often it is cleaned.
- Floor types and methods: including where machine hard-floor care is needed on industrial floors.
- Washrooms and consumables: the number of washrooms, restocking requirements and who supplies consumables.
- Access controls: keys, fobs, alarms, sign-in, gate procedures and escort rules for that unit.
- Waste boundaries: hazardous or specialist waste remains the responsibility of the site.
- Performance checks: how the agreed scope is reviewed and how issues are reported.
Clear instructions support safe working and consistent results. The HSE’s guidance on COSHH and cleaning products, common risks in cleaning work and workplace facilities provides further practical reference.
How CQD would plan a unit here
The process is straightforward:
- Free site assessment: we review the areas, cleaning needs, access arrangements and operating times with you.
- Written unit specification: you can check the included areas, frequencies, exclusions and access instructions before the plan is agreed.
- Fixed monthly plan: the final fixed monthly price is confirmed after the free site assessment.
- Mobilisation: cleaning typically starts within 5–7 working days once the specification is agreed. An initial deep clean is included when a new plan starts.
- Consistent delivery: the same local two-person team is assigned to your premises. Cleaning times are agreed with your site, and you can contact us for a response within 2 working hours.
If you’re changing provider, our switching process sets out how the handover can be planned around your unit’s access and schedule.
Choose a plan by scope, not guesswork
Each fixed monthly plan provides a defined scope. No long-term contract. 30 days’ notice to end the monthly fixed monthly plan.
- Bronze, essential daily cleaning: vacuuming, mopping, bins, surfaces and desks, plus washroom cleaning and restocking. An initial deep clean is included when a new plan starts.
- Silver, more floor and shared-space care: everything in Bronze, plus machine hard-floor cleaning, deeper kitchen and breakroom cleaning, and daily touch-point sanitisation.
- Gold, the fullest routine: everything in Silver, plus daily machine hard-floor cleaning and washroom consumables fulfilment.
The right option depends on your premises, floor types and the work taking place in each unit. We’ll help you decide after the site assessment.
A commercial cleaning specialist with clear standards
CQD provides commercial premises cleaning only. We’ve been trading since 2012 and have served over 500 businesses. CQD is ISO 9001, ISO 14001 and ISO 45001 certified, a BICSc member and CHAS accredited, and fully insured. Teams are DBS-checked and reference-verified, and work to CQD’s quality standards.
CQD serves 33 named locations across the South East and Home Counties, including Slough, Maidenhead, Windsor, Reading, High Wycombe and Bracknell. Businesses with other premises can also find information about office cleaning in Maidenhead and commercial cleaning in Windsor.
Registered address: 1 Aston Court, Kingsmead Business Park, High Wycombe, Buckinghamshire, HP11 1LA
Call: 01494 911001
Frequently asked questions
Why is access agreed per unit rather than for the whole estate?
Each occupier may have different gates, keys, alarms, restricted areas, escorts and working hours. A separate agreement makes the permissions and cleaning window clear for that unit.
Do you clean data centres?
CQD’s general cleaning scope covers surrounding offices, welfare areas, circulation spaces, meeting rooms and general floors. Server halls, white space and critical-environment areas are excluded and require specialist arrangements.
How does out-of-hours working affect the schedule?
It makes agreed access controls more important. Sign-in, escorts, alarms and a named contact should be confirmed in advance, and the cleaning window should fit around shift changes and site activity.
How quickly can cleaning start on an empty unit?
Mobilisation typically takes 5–7 working days once the specification is agreed. An initial deep clean is included when a new plan starts.
Arrange a free site assessment
Get a clear scope for your unit, agreed access arrangements and a fixed monthly plan. Request a free, no-obligation site assessment.
